Request:
– Bootloader unlocked
– Xiaomi USB driver is installed on your PC
– PC / TWRP
– micro SD card
– Minimum ADB & Fastboot (If using PC)
– ROM:
- Xiaomi Redmi Go (EEA) (tiare_eea) – Stable (Download here)
- Xiaomi Redmi Go (tiare) – Global Stable (Download here)
- Xiaomi Redmi Go (Indian) (tiare_in) – Stable (Download here)
- Xiaomi Redmi Go (Russian) (tiare_ru) – Stable (Download here)
First, extract the zip file. You will find a folder named images. Open it and search for “recovery.img”. Copy it to a safe place (you will need it later).
Then copy the zip file to your sd card.
Steps, if you are using a PC
1. Minimum ADB & Fastboot installation (Download here)
2. Copy the “recovery.img” file that you extracted earlier, to the folder where your “Minimum Adb & Fastboot” is installed.
3. Run “cmd-here” and enter fastboot flash recovery recovery.img
4. Turn on recovery mode on your device by pressing and holding Volume + and the power button together.
5. When you see the “No command” screen, hold the power button and press the volume + button and you will be on the recovery menu.
6. Select apply update from SD Card and find the file.
7. Select “Yes”
8. System restart.
Steps, if you are using TWRP
1. Copy the “recovery.img” file that you previously extracted to the SD Card.
2. Boot TWRP
3. Select Install
4. Select Picture settings
5. Locate the “recovery.img” file in your SD Card and install it.
6. Return to the main menu and reboot into recovery.
7. When you see the “No command” screen, hold the power button and press the volume + button and you will be on the recovery menu.
6. Select apply update from SD Card and find the file.
7. Select “Yes”
8. System restart.
Your device will now run a clean stock ROM and restore.